•- Inflatable knot replicates the natural expansion during the canine
act of tying.
•- Medical
grade silicone, completely odorless, hypoallergenic.
•- High gloss, silky smooth finish emulates the natural wet look and feel.
•- Embedded natural, provocative color tints, no surface colorants
to rub or wear off.
•- Soft and pliable, just-right firmness, stiffens slightly and naturally as the knot swells.
•- Durable hose connection is easily removed and reinserted, it is
absolutely secure air-tight and will not leak.
•- Highest quality, high-flex, 1/4" diameter, four foot, non-latex, hypoallergenic hose for
versatile use. Hose length is easily resized.
•- Highest quality inflation bulb with chrome valve, non-latex.
•- Stay put, soft, sensual and comfortable design for extended or under-garment wear.
•- May be filled with hot water for a warm and sensual experience.
•- Nylon plug included
for hot water fill, hose-less use, extended wear, etc.
•- Compatible will all personal lubricants except silicone based lubes, Cinnalube
recommended (sample included with every order).
•- No special maintenance, clean with soap and water, carefully crafted to last a lifetime.
••- Lifetime guaranteed against manufacture defects with proper care
and use.
- T-connector
available to connect and inflate 2 Vixens,etc. from one inflation bulb.
- Colors vary, no 2 are the same as they
are individually hand fashioned by our artists to replicate the provocative natural color variations of the canine
penis.
- Individual works of art of collector status and value.
Sizes
Vixen (uninflated dimensions in inches" and centimeters )
- Insertable length (not including the base): 9" (23 cm)
- Length from tip to beginning of knot: 4.5" (12 cm)
- Shaft size between the tip and knot at largest point: 1.27" (3 cm) diameter or 4.25" (11 cm) around
- Knot size: the knot is oval in shape and about 6" (15.24 cm) around
or about 1.9" (5 cm) diameter
- Overall length from
end to end: 10.25" (26 cm)
- The Vixen knot
is soft and about the size of a golf ball. It grows to the size of a tennis ball (with about 7 pumps) or larger and
is easily controlled. The shaft also expands slightly resembling the natural growth of the canine penis.
The length also increases about 1 to 1.5" when inflated.
Magic (uninflated dimensions
in inches" and centimeters)
- Insertable length (not including the
base): 7" (18 cm)
- Length from tip to beginning of knot: 3.5"
(9 cm)
- Shaft size between the tip and knot at largest point: 1.25" (3 cm)
diameter or 4" (10 cm) around
- Knot size: the knot is egg shaped and
about 5" (13 cm) around or about 1.6" (4 cm) diameter
-
Overall length from end to end: 8.5"(22 cm)
- Magic's knot is soft with a natural egg shape that makes for easy
insertion. It swells to the size of a tennis ball (with about 7 pumps) or larger and is easily controlled. The
shaft also expands slightly resembling the natural growth of the canine penis. The length also increases about
1" when inflated.
Neo (uninflated dimensions in inches" and centimeters)
-
Insertable length from tip to front base testicles (not including the base): 5" (13 cm)
- Length from tip to beginning of knot: 2" (5 cm)
- Shaft size between
the tip and knot at largest point: 1.25" (3 cm) diameter or 4" (10 cm) around
- Knot size: the knot is about 5.5" (14 cm) around or about 1.8" (4.5 cm) diameter
- Overall length from end to end: 6.25" (15 cm)
- Neo is our short model. The knot is soft with natural shape for
easy insertion. It swells to the size of a tennis ball (with about 7 pumps) and is easily controlled.
-
The total length also increases about 1" when inflated.
Uni (uninflated
dimensions in inches" and centimeters)
- Insertable length (not including the
base): 5" (13 cm)
- Length from tip to beginning of knot: 2.5"
(6 cm)
- Shaft size between the tip and knot at largest point: 1" (2.5 cm)
diameter or 3.25" (8 cm) around
- Knot size: the knot is egg shaped and
about 4.1" (10.4 cm) around or about 1.3" (3.3cm) diameter
-
Overall length from end to end: 6" (15cm)
-
Uni is our smallest model made especially for the beginner. The knot is soft with natural shape for easy insertion.
It swells to the size of a racquet ball (with about 7 pumps) or larger and is easily controlled. The shaft also expands
slightly resembling the natural growth of the canine penis. The length also increases about 1" when inflated.
The slim size and naturally shaped pronounced testicle base makes this model ideal for beginners and long term wear even for
the completely inexpereinced. The pronounced testicles provide a secure and seductive base that tweaks the shaft and knot
with every body motion, continuously teasing you to the edge of orgasm.
Directions (applies to all inflatable models)
- To inflate, close the chrome valve (clockwise)
and squeeze bulb. Open the valve (counterclockwise) to deflate. Close the valve partially to create a rhythmic, pulsing action
when the bulb is squeezed repeatedly.
- Hose may be pulled out and replaced with plug (included). Hose
is easily removed and reinserted. Insert hose to about 1/2 inch (2cm) deep.
- Vixen,etc. may be
filled with hot water for a warm, sensual experience. Simple remove hose, fill with hot tap water by squeezing the knot and
insert plug to seal.
- The inflation bulb may be used to fill any inflatable model with water similar to how it is filled
with air. Remove hose from Vixen and fill Vixen with water. Next, fill bulb and hose with water, close valve (clockwise), submerge
bulb in water, and squeeze bulb until water fills bulb and hose, pouring out the end of the hose. Finally, re-connect hose
to pump more water into Vixen. Remember to keep bulb submerged or you will get air in the line. Be sure to drain all water
and dry out squeeze bulb and valve after use. Vixen may be filled to desired size with water and sealed with plug.
- Compatible
with all personal lubricants except silicone based lubes, Cinnalube recommended (sample included with every order).
Do not use silicone based personal lubricants as they may damage your model.
- Store your Vixen in a fresh, clean place like a
clean laundry closet. The silicone absorbs surrounding odors and will smell like anything you store it with. DO NOT store
it with other rubber, vinyl, jelly or other strong smelling toys or items.
T & Tie Connector Kit
- The optional T/Tie connector kit includes 2 types of connectors. The first is a T connector with two 4 foot flexible
tube extensions that allow you to connect two canine models to one inflation bulb. The second connector allows you to connect
two canine models together at the base (and to one inflation bulb or not) to simulate a canine tie with your partner. Both
knots will be inflated the same when connected together. There is also a tube cap included that allows you to inflate only
one knot. The T/Tie connector kit is included free with the purchase of 2 canine models or with the future purchase of a second
canine model.
- We also offer Squriting-Inflatable versions
of our canine models.
